LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla CE, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutches Manual & Hydraulic) >> Clutch Start Switch >> Removal

Clutch Start Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE CLUTCH START SWITCH ASSEMBLY 
    1. Disconnect the clutch start switch assembly connector.
    2. Remove the nut and clutch start switch assembly from the clutch pedal support.
scientia non olet · About LEMON Manuals