Tire Pressure Warning Valve And Transmitter: Disposal

HINT:

The tire pressure warning valve sub-assembly is powered by a lithium battery. When disposing of the tire pressure warning valve sub-assembly, remove the battery and dispose of it correctly.

1. DISPOSE OF TIRE PRESSURE WARNING VALVE SUB-ASSEMBLY 
   1. Use the tip of a screwdriver to pry off the back cover.
      Fig 1: Prying Off Back Cover

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. The battery and base board covered with resin are exposed. While taking out the battery, cut the 2 terminals that connect the battery to the base board.
      Fig 2: Identifying Lithium Battery And Terminal

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002