LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Clutches Manual & Hydraulic) >> Clutch Release Cylinder >> Disassembly

Clutch Release Cylinder: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE CLUTCH RELEASE CYLINDER KIT 
    1. Remove the boot from the cylinder body.
    2. Remove the push rod from the cylinder body.
    3. Remove the piston from the cylinder body.
      NOTE: Be careful not to damage the inside of the cylinder body.
    4. Remove the spring from the cylinder body.
    5. Remove the bleeder plug cap from the bleeder plug.
  2. REMOVE RELEASE CYLINDER BLEEDER PLUG 
    1. Remove the bleeder plug from the cylinder body.
scientia non olet · About LEMON Manuals