LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (2AZ-FE) >> Heated Oxygen Sensor >> Removal

Heated Oxygen Sensor: Removal

  1. REMOVE HEATED OXYGEN SENSOR 
    1. Disconnect the heated oxygen sensor connector.
      Fig 1: Identifying Heated Oxygen Sensor Connector
      G04975140Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the heated oxygen sensor from the exhaust pipe assembly front No. 3.

      SST 09224-00010 

      NOTE: Do not damage the heated oxygen sensor.
      Fig 2: Identifying Heated Oxygen Sensor
      G04975141Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals