LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Except Hybrid) >> Brake Booster >> Inspection

Brake Booster: Inspection

  1. INSPECT VACUUM CHECK VALVE 
    1. Inspect the vacuum check valve.
      1. Slide the clip and disconnect the vacuum hose.
      2. Remove the vacuum check valve.
      3. Check that there is ventilation from the booster to the engine, and no ventilation from the engine to the booster. If the results are not as specified, replace the brake booster assembly.
        Fig 1: Inspecting Vacuum Check Valve
        G04978366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals