Luggage Compartment Door Garnish: Removal

REMOVE LUGGAGE COMPARTMENT DOOR COVER
1. Using a clip remover, remove the 13 clips and luggage compartment door cover.
  
  Fig 1: Locating Luggage Compartment Door Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Smart Key System) (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY
1. Disconnect the rod.
  
  Fig 2: Disconnecting Rod
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the cable and connector.
  
  Fig 3: Locating Cable And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 nuts and luggage compartment door lock cylinder assembly.
  
  Fig 4: Identifying Luggage Compartment Door Lock Cylinder Assembly Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH
1. Put protective tape around the luggage compartment door outside garnish.
  
  Fig 5: Applying Protective Tape Around Luggage Compartment Door Outside Garnish
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 3 nuts.
  
  Fig 6: Identifying Luggage Compartment Door Outside Garnish Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish.
  
  Fig 7: Identifying Luggage Compartment Door Outside Garnish Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE SYMBOL EMBLEM

HINT:

When removing the symbol emblem, heat the luggage compartment door outside garnish and symbol emblem using a heat light.

Heating temperature

HEATING TEMPERATURE SPECIFICATIONS

Item	Temperature
Luggage compartment door outside garnish	40 to 60°C (104 to 140°F)
Symbol emblem	20 to 30°C (68 to 88°F)

NOTE: Do not heat the luggage compartment door outside garnish and symbol emblem excessively.

Put protective tape around the symbol emblem.
Insert a piano wire between the luggage compartment door outside garnish and symbol emblem.

Fig 8: Removing Symbol Emblem
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the luggage compartment door outside garnish.
NOTE:
- If reusing the symbol emblem, take care not to damage the symbol emblem.
- Be careful not to damage the luggage compartment door outside garnish.
Remove the symbol emblem.