Front Bumper: Reassembly

INSTALL FRONT BUMPER SIDE RETAINER LH
1. Engage the claw and install the front bumper side retainer LH.
2. Install the screw.
INSTALL FRONT BUMPER SIDE RETAINER RH

Fig 1: Identifying Front Bumper Side Retainer Screw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
1. Install the front bumper reinforcement sub-assembly with the 6 bolts.
  Torque: 34 N*m (347 kgf*cm, 25 ft.*lbf)
  
  Fig 2: Identifying Front Bumper Reinforcement Sub-Assembly Clamp And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage each clamp.
INSTALL FRONT BUMPER ENERGY ABSORBER
1. Install the front bumper energy absorber to the front bumper reinforcement sub-assembly.
  
  Fig 3: Identifying Front Bumper Energy Absorber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE EMBLEM
1. Engage the 4 claws and install the radiator grille emblem.
  
  Fig 4: Identifying Radiator Grille Emblem Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER UPPER RETAINER
1. Install the front bumper upper retainer with the 3 clips.
  
  Fig 5: Identifying Front Bumper Upper Retainer Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HOOD TO FRONT END PANEL SEAL
1. Apply new double-sided tape to the hood to front end panel seal.
2. Remove the release paper from the hood to front end panel seal.
3. Install the hood to front end panel seal with the 10 clips.
  
  Fig 6: Identifying Hood Front End Panel Seal Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE
1. Engage the 16 claws and install the radiator grille.
2. Install the 2 screws.
  
  Fig 7: Identifying Radiator Grille Claws And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER RADIATOR GRILLE
1. Engage the 14 claws and install the lower radiator grille.
  
  Fig 8: Identifying Lower Radiator Grille Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
1. Engage the 5 claws and install the front bumper hole cover LH.
INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

Fig 9: Identifying Front Bumper Hole Cover Claws (W/O Fog Light)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)
1. Engage the 5 claws and install the front bumper hole cover LH.
  
  Fig 10: Identifying Front Bumper Hole Cover Claws LH (W/ Fog Light)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)
INSTALL FRONT BUMPER LOWER COVER (w/ Cover)
1. Engage the 2 claws and install the front bumper lower cover.
  
  Fig 11: Identifying Front Bumper Lower Cover Claws (W/ Cover)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)
1. Engage the 2 claws and install the front bumper extension mounting bracket.
2. Install the 2 screws.
  
  Fig 12: Identifying Front Bumper Extension Mounting Bracket Screws And Claws (W/ Bracket)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER EXTENSION LH (w/ Front Spoiler)
1. Install the front bumper extension LH with the 2 nuts.
  
  Fig 13: Identifying Front Bumper Extension Nuts (W/ Front Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER EXTENSION RH (w/ Front Spoiler)
INSTALL FRONT SPOILER (w/ Front Spoiler)
1. Engage the 17 claws and install the front spoiler.
2. Install the 25 clips and 2 screws.
  
  Fig 14: Identifying Front Spoiler Screws And Clips (W/ Front Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) (See ADJUSTMENT )
INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)