Front Wiper Motor: Removal
- REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
- Remove the nut and the front wiper arm and blade assembly LH.
- REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
- Remove the nut and the front wiper arm and blade assembly RH.
- REMOVE FRONT FENDER TO COWL SIDE SEAL LH
- Disengage the claw and remove the front fender to cowl side seal LH.
- REMOVE FRONT FENDER TO COWL SIDE SEAL RH
- Disengage the claw and remove the front fender to cowl side seal RH.
- REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
- Remove the 2 clips.
- Disengage the 4 claws and remove the cowl top ventilator louver sub-assembly.
- REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
- Disconnect the connector.
- Remove the 4 bolts and the windshield wiper motor and link assembly.
- REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
- Using a screwdriver, separate the No. 2 windshield wiper link rod from the crank arm pivot of the front wiper motor assembly as shown in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HINT:
Tape the screwdriver tip before use.
- Move the crank arm in the direction indicated by the arrow.
- Remove the 3 bolts and the windshield wiper motor assembly from the windshield wiper link assembly.
- Using a screwdriver, separate the No. 2 windshield wiper link rod from the crank arm pivot of the front wiper motor assembly as shown in the illustration.