Rocker Panel Moulding: Removal

REMOVE ROCKER PANEL MOULDING PROTECTOR
1. Remove the 2 screws and rocker panel moulding protector.
  
  Fig 1: Identifying Rocker Panel Moulding Protector Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ROCKER PANEL MOULDING
1. Put protective tape around the rocker panel moulding.
  
  Fig 2: Applying Protective Tape Around Rocker Panel Moulding
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and grommet.
  
  Fig 3: Identifying Rocker Panel Moulding Screws And Grommet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the screw.
  
  Fig 4: Identifying Rocker Panel Moulding Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 7 clips.
  
  Fig 5: Identifying Rocker Panel Moulding Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 2 screws.
  
  Fig 6: Identifying Rocker Panel Moulding Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Disengage the 8 clips and remove the rocker panel moulding.
  
  Fig 7: Identifying Rocker Panel Moulding Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002