Rear Bumper: Reassembly

INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY
1. Install the rear bumper reinforcement sub-assembly with the 6 nuts.
  Torque: 68 N*m (693 kgf*cm, 50 ft.*lbf)
  
  Fig 1: Identifying Identifying Rear Bumper Bar Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER BAR
1. Install the rear bumper bar on the rear bumper energy absorber.
  
  Fig 2: Identifying Rear Bumper Bar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER ENERGY ABSORBER
1. Engage the 4 claws and install the rear bumper energy absorber.
2. Install the 4 bolts.
  
  Fig 3: Identifying Rear Bumper Energy Absorber Claws And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WHEEL HOUSE REINFORCEMENT LH
1. Install the wheel house reinforcement LH with the nut.
  
  Fig 4: Identifying Wheel House Reinforcement Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WHEEL HOUSE REINFORCEMENT RH
INSTALL REAR BUMPER SIDE RETAINER LH
1. Engage the 3 claws and install the rear bumper side retainer LH.
2. Install the 2 screws.
  
  Fig 5: Identifying Rear Bumper Side Retainer Claws And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER SIDE RETAINER RH
INSTALL REAR BUMPER SIDE SUPPORT LH
1. Engage the 3 claws and install the rear bumper side support LH.
2. Install the 2 screws.
  
  Fig 6: Identifying Rear Bumper Side Support Claws And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER SIDE SUPPORT RH
INSTALL REAR BUMPER PAD
1. Apply new double-sided tape to the rear bumper pad.
2. Remove the release paper from the rear bumper pad.
3. Install the rear bumper pad.
  HINT:
  
  Use the same procedures for the RH side and LH side.
  
  Fig 7: Identifying Rear Bumper Pad
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER PLATE LH
INSTALL REAR BUMPER PLATE RH
INSTALL REAR BUMPER EXTENSION LH (w/ Rear Lower Spoiler)
1. Install the rear bumper extension LH with the 2 nuts.
  
  Fig 8: Identifying Rear Bumper Extension Nuts (W/ Rear Lower Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER EXTENSION RH (w/ Rear Lower Spoiler)
INSTALL REAR LOWER SPOILER (w/ Rear Lower Spoiler)
1. Engage the 16 claws and install the rear lower spoiler.
2. Install the 16 clips, 4 nuts and 2 screws.
  
  Fig 9: Identifying Rear Lower Spoiler Screws, Nuts And Clips (W/ Rear Lower Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002