LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Taillight Relay >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT TAILLIGHT RELAY 
    1. Remove the taillight relay from the instrument panel J/B assembly.
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE REFERENCE

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      Below 1 Ω (When battery voltage is applied to terminals 1 and 2)
      3 - 4 Below 1 Ω
      10 kΩ or higher (When battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the taillight relay.

      Fig 1: Inspecting Taillight Relay
      G04980113Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals