Rear Combination Light Assembly: Removal
- REMOVE REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler) (See REMOVAL )
- REMOVE REAR FLOOR BOARD (w/ Rear Lower Spoiler) (See REMOVAL )
- REMOVE REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler) (See REMOVAL )
- REMOVE LUGGAGE COMPARTMENT FLOOR MAT
- REMOVE SPARE WHEEL COVER CLAMP
- REMOVE SPARE WHEEL COVER ASSEMBLY
- REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY (See REMOVAL )
- REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (See REMOVAL )
- REMOVE REAR FLOOR FINISH PLATE (See REMOVAL )
- REMOVE REAR COMBINATION LIGHT ASSEMBLY
- Disconnect the 2 connectors and clamp.
- Remove the 3 nuts.
- Disengage the clip and remove the rear combination light assembly.
- REMOVE LUGGAGE COMPARTMENT DOOR COVER (See REMOVAL )
- REMOVE REAR LIGHT ASSEMBLY
- Disconnect the connector and clamp.
- Remove the 3 nuts.
- Disengage the pin and remove the rear light assembly.
HINT:
Be careful not to break the engaging portion of the pin when removing the rear light assembly.