LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Rear Combination Light Assembly >> Disassembly

Rear Combination Light Assembly: Disassembly

  1. REMOVE REAR COMBINATION LIGHT GASKET 
    1. Remove the rear combination light gasket.
      NOTE:
      • Be sure to remove the all traces of the old gasket from the body.
      • Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
        Fig 1: Identifying Rear Combination Light Gasket
        G04980151Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE TAIL AND STOP LIGHT BULB 
    1. Turn the tail and stop light bulb and the rear combination light socket in the direction indicated by the arrow and disconnect them as a unit.
    2. Remove the tail and stop light bulb from the tail and stop light socket.
      Fig 2: Removing Tail And Stop Light Bulb
      G04980152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR TURN SIGNAL LIGHT BULB 
    1. Turn the rear turn signal light bulb and the rear light socket and wire in the direction indicated by the arrow and disconnect them as a unit.
    2. Remove the rear turn signal light bulb from the rear light socket and wire.
      Fig 3: Removing Rear Turn Signal Light Bulb
      G04980153Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE REAR BUMPER RETAINER UPPER 
    1. Disengage the claw and remove the rear bumper retainer upper.
      Fig 4: Identifying Rear Bumper Retainer Upper
      G04980154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE BACK UP LIGHT BULB 
    1. Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
    2. Remove the back up light bulb from the rear light socket and wire.
      Fig 5: Removing Back Up Light Bulb
      G04980155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE TAIL LIGHT BULB 
    1. Turn the tail light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
    2. Remove the tail light bulb from the rear light socket and wire.
      Fig 6: Removing Tail Light Bulb
      G04980156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR LIGHT GASKET 
    1. Remove the rear light gasket.
      NOTE:
      • Be sure to remove all traces of the old gasket from the body.
      • Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.
        Fig 7: Identifying Rear Light Gasket
        G04980157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals