Headlight Assembly: Repair

HINT:

If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
Ensure that the headlight assembly is not damaged.

INSTALL UPPER HEADLIGHT PROTECTOR RETAINER
1. Cut off the part shaded in the illustration and smooth with sandpaper.
  NOTE: After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old retainer if it interferes with the installation of the supply bracket.
  
  Fig 1: Identifying Upper Headlight Protector Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the upper headlight protector retainer with the 2 screws.
  
  Fig 2: Identifying Upper Headlight Protector Retainer And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER HEADLIGHT PROTECTOR RETAINER
1. Cut off the part shaded in the illustration and smooth with sandpaper.
  NOTE: After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old retainer if it interferes with the installation of the supply bracket.
  
  Fig 3: Identifying Lower Headlight Protector Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the lower headlight protector retainer with the 2 screws.
  
  Fig 4: Identifying Lower Headlight Protector Retainer And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER HEADLIGHT BRACKET
1. Cut off the part shaded in the illustration and smooth with sandpaper.
  NOTE: After cutting off the part, place the lower headlight bracket against the bosses and gradually file away the old bracket if it interferes with the installation of the supply bracket.
  
  Fig 5: Identifying Lower Headlight Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the lower headlight bracket with the 2 screws.
  
  Fig 6: Identifying Lower Headlight Bracket And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002