LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Headlight Assembly >> Reassembly

Headlight Assembly: Reassembly

  1. INSTALL FRONT SIDE MARKER LIGHT BULB 
    1. Install the front side marker light bulb to the front side marker light socket.
    2. Turn the front side marker light bulb and front side marker light socket in the direction indicated by the arrow and install them as a unit.
    Fig 1: Installing Front Side Marker Light Bulb
    G04980128Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT TURN SIGNAL LIGHT BULB 
    1. Install the front turn signal light bulb to the front turn signal light socket.
    2. Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.
      Fig 2: Installing Front Turn Signal Light Bulb
      G04980129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 1 HEADLIGHT BULB 
    1. Install the No. 1 headlight bulb as shown in the illustration.
      Fig 3: Installing No. 1 Headlight Bulb
      G04980130Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 2 HEADLIGHT BULB 
    1. Install the No. 2 headlight bulb as shown in the illustration.
    Fig 4: Installing No. 2 Headlight Bulb
    G04980131Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals