LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Glove Box Light >> Inspection

Glove Box Light: Inspection

  1. INSPECT GLOVE BOX LIGHT ASSEMBLY 
    1. Apply battery voltage to the glove box light assembly connector.
    2. Check that the glove box light comes on.
      Fig 1: Identifying Glove Box Light Assembly Connector Terminals
      G04980197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK 

      VOLTAGE SPECIFICATION

      Measurement Condition Switch Condition Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1      		 Glove box light switch ON Glove box light comes on

      If the result is not as specified, replace the bulb or glove box light assembly.

scientia non olet · About LEMON Manuals