LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Door Courtesy Light >> Inspection

Door Courtesy Light: Inspection

  1. INSPECT DOOR COURTESY LIGHT ASSEMBLY 
    1. Apply battery voltage to the door courtesy light assembly connector.
    2. Check that the door courtesy light comes on.

      OK 

      VOLTAGE SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2      		 Door courtesy light comes on

      If the result is not as specified, replace the bulb or door courtesy light assembly.

    Fig 1: Identifying Door Courtesy Light Connector Terminal
    G04980188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals