Front Wiper Motor: Removal

HINT:

Installation is in the reverse order of removal.

1. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH 
   1. Remove the nut and FR wiper arm & blade assembly LH.
      Fig 1: Locating FR Wiper Arm And Blade Assembly LH Nut

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH 
   1. Remove the nut and FR wiper arm & blade assembly RH.
      Fig 2: Locating FR Wiper Arm And Blade Assembly RH Nut

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY 
   1. Disengage the 12 clips, and remove the cowl top ventilator louver RH.
      Fig 3: Identifying Cowl Top Ventilator Louver RH Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY 
   1. Disconnect the connector.
   2. Remove the 4 bolts and windshield wiper motor & link assembly.
      Fig 4: Locating Windshield Wiper Motor And Link Assembly Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. REMOVE WINDSHIELD WIPER LINK ASSEMBLY 
   1. Using a screwdriver wrapped with protective tape, separate the rod of the wiper link assembly from the windshield wiper motor assembly as shown in the illustration.
      Fig 5: Separating Rod Of Wiper Link Assembly

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 3 bolts and wiper link assembly.
      Fig 6: Locating Wiper Link Assembly Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002