LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Avalon XLS >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Front Wiper Motor >> Installation

Front Wiper Motor: Installation

  1. INSTALL WINDSHIELD WIPER LINK ASSEMBLY 
    1. Install the windshield wiper motor assembly with the 3 bolts.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

      Fig 1: Locating Wiper Link Assembly Bolts
      G05005872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the rod to the wiper link assembly.
      Fig 2: Installing Rod To Wiper Link Assembly
      G05005876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY 
    1. Install the windshield wiper motor & link assembly with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      Fig 3: Locating Windshield Wiper Motor And Link Assembly Bolts
      G05005870Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  3. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH 
    1. Operate the wiper, and stop the windshield wiper motor assembly at the automatic stop position.
    2. Clean the wiper arm serrations.
    3. Clean the wiper pivot serrations with a wire brush (before reinstalling).
      Fig 4: Cleaning Wiper Pivot Serrations With Wire Brush
      G05005878Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the FR wiper arm & blade assembly RH with the nut at the position as shown in the illustration.

      Torque: 20 N*m (209 kgf*cm, 15 ft.*lbf) 

      HINT:

      Hold the arm hinge by hand to fasten the nut.

      Fig 5: Identifying Installation Position Of FR Wiper Arm And Blade Assembly RH
      G05005879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH 
    1. Clean the wiper arm serrations.
    2. Clean the wiper pivot serrations with a wire brush (when reinstalling).
      Fig 6: Cleaning Wiper Pivot Serrations With Wire Brush
      G05005880Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the FR wiper arm & blade assembly LH with the nut at the position shown in the illustration.

      Torque: 20 N*m (209 kgf*cm, 15 ft.*lbf) 

      HINT:

      Hold the arm hinge by hand to fasten the nut.

      Fig 7: Identifying Installation Position Of FR Wiper Arm And Blade Assembly LH
      G05005881Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002