REAR STABILIZER BAR (for 4WD): Removal

REMOVE REAR WHEELS
REMOVE REAR STABILIZER LINK ASSEMBLY LH
1. Remove the 2 nuts and rear stabilizer link assembly LH.
  
  Fig 1: Locating Rear Stabilizer Link Assembly LH With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
REMOVE REAR STABILIZER LINK ASSEMBLY RH
1. Remove the 2 nuts and rear stabilizer link assembly RH.
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
REMOVE REAR STABILIZER BAR
1. Left side:
  Remove the bolt.
  
  Fig 2: Locating Rear Stabilizer Bar And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Right side:
  Remove the 2 bolts and rear stabilizer bar.
  
  Fig 3: Locating Rear Stabilizer Bar With 2 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002