REAR NO. 2 SUSPENSION ARM (for 2WD): Removal

REMOVE REAR WHEEL
REMOVE REAR SUSPENSION NO. 2 ARM
1. Remove the bolt, and disconnect the rear suspension arm No.2 (inner side).
  
  Fig 1: Locating Rear Suspension Arm No.2 (Inner Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt, nut and the rear suspension arm No.2 (outer side) from the rear axle carrier.
  
  Fig 2: Locating Rear Suspension Arm No.2 (Outer Side) To Rear Axle Carrier
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE: When removing the bolt, keep the nut from rotating.