REAR NO. 1 SUSPENSION ARM (for 4WD): Removal

REMOVE REAR WHEEL
SEPARATE PARKING BRAKE NO.3 CABLE ASSEMBLY (See REMOVAL )
REMOVE REAR STRUT ROD (See REMOVAL )
REMOVE REAR SUSPENSION NO. 1 ARM
1. Remove the 2 bolts, 2 nuts, and rear suspension arm No. 1.
  
  Fig 1: Locating Bolts, Nuts, And Rear Suspension Arm No. 1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Secure the nuts and turn the bolts to remove them.
  - Do not turn the nuts because they have a rotational stopper.