LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension (Hybrid) >> Front Suspension Lower No. 1 Arm >> Removal

Front Suspension Lower No. 1 Arm: Removal

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    HINT:

    Refer to the instructions for installation of the engine assembly (See REMOVAL ).

  2. REMOVE ENGINE MOUNTING INSULATOR 
    1. Remove the 3 nuts and the engine mounting insulator.
      Fig 1: Locating Engine Mounting Insulator With Nuts
      G05202518Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT SUSPENSION NO. 1 LOWER ARM 
    1. Remove the 3 bolts and the nut on the front suspension lower arm No. 1 and remove it from the front frame assembly.
      2. Fig 2: Locating Bolts And Nut On Front Suspension Lower Arm No. 1
      G04977708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front lower arm bushing stopper.
scientia non olet · About LEMON Manuals