Front Suspension Lower No. 1 Arm: Installation

INSTALL FRONT SUSPENSION NO. 1 LOWER ARM
1. Install the front lower arm bushing stopper.
2. Install the front suspension lower arm No. 1 to the front frame assembly with the 3 bolts and the nut, but do not tighten them yet.
3. Tighten the 3 bolts in numerical order shown in the illustration.
  Torque: 200 N*m (2,040 kgf*cm, 148 ft.*lbf) (bolt 1, 2)
  
  206 N*m (2,100 kgf*cm, 152 ft.*lbf) (bolt 3)
  
  Fig 1: Locating Front Suspension Lower Arm No. 1 To Front Frame Assembly With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE MOUNTING INSULATOR
1. Install the engine mounting insulator with the 3 nuts.
Torque: 87 N*m (887 kgf*cm, 64 ft.*lbf)

Fig 2: Locating Engine Mounting Insulator With Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
HINT:

Refer to the instructions for removal of the engine assembly (See INSTALLATION ).