LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension (Hybrid) >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. DISPOSE OF FRONT SHOCK ABSORBER 
    1. Fully extend the shock absorber rod.
    2. Using a drill, make a hole in area B shown in the illustration to discharge the gas inside.
      CAUTION:
      • Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
      • The gas is colorless, odorless and non-poisonous.
        Fig 1: Identifying Front Shock Absorber Dimension
        G05202516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals