Rear Center Seat Inner Belt Assembly: Installation

INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
1. Install the rear center seat inner belt assembly with the bolt.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  NOTE:
  - Tighten the bolt while the claws of the rear center seat inner belt assembly are in contact with the vehicle body.
  - Claw 1 shown in the illustration can have a clearance of up to 2.0 mm (0.08 in.) between the claw and the vehicle body.
    
    Fig 1: Identifying Rear Center Seat Inner Belt Assembly And Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  HINT:
  
  Place the buckle of the rear center seat inner belt assembly on the floor carpet so that the buckle does not interfere with installation of the seat.
INSTALL REAR NO.1 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat) (See INSTALLATION )
INSTALL SEAT TRACK COVER INNER RH (w/ Rear No. 2 Seat)
INSTALL REAR SEAT TRACK BRACKET COVER INNER RH (w/ Rear No. 2 Seat)
INSTALL REAR SEAT TRACK COVER RH (w/ Rear No. 2 Seat)
INSTALL REAR SEAT TRACK BRACKET COVER OUTER (w/ Rear No. 2 Seat)
INSPECT SLIDE ADJUSTER LOCK (w/ Rear No. 2 Seat) (See INSTALLATION )
INSTALL REAR NO.1 SEAT ASSEMBLY LH (w/o Rear No. 2 Seat) (See INSTALLATION )
INSTALL REAR SEAT TRACK BRACKET COVER INNER (w/o Rear No. 2 Seat)
INSTALL REAR SEAT TRACK BRACKET COVER OUTER (w/o Rear No. 2 Seat)
INSPECT SLIDE ADJUSTER LOCK (w/o Rear No. 2 Seat) (See INSTALLATION )