LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (Hybrid) >> Heated Oxygen Sensor >> Removal

Heated Oxygen Sensor: Removal

  1. REMOVE OXYGEN SENSOR (for Bank 1) 
    1. Disconnect the oxygen sensor connector and clamp.
      Fig 1: Locating Oxygen Sensor Connector And Clamp
      G05200992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the oxygen sensor from the exhaust pipe assembly front No.3.

      SST 09224-00010 

      NOTE: Do not damage the oxygen sensor.
      Fig 2: Removing Oxygen Sensor
      G05200993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE OXYGEN SENSOR (for Bank 2) 
    1. Disconnect the oxygen sensor connector.
      Fig 3: Locating Oxygen Sensor Connector
      G05200994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the oxygen sensor from the exhaust pipe assembly front.

      SST 09224-00010 

      NOTE: Do not damage the oxygen sensor.
      Fig 4: Removing Oxygen Sensor
      G05200995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals