LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (Hybrid) >> Air Fuel Ratio Sensor >> Inspection

Air Fuel Ratio Sensor: Inspection

  1. INSPECT AIR FUEL RATIO SENSOR 
    1. Using an ohmmeter, measure the resistance between terminals 1 (HT) and 2 (+B).

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATION

      Condition Specified Condition
      20°C (68°F) 1.8 to 3.4 Ω

      If the result is not as specified, replace the sensor.

      Fig 1: Identifying Air Fuel Ratio Sensor Terminal
      G04975133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals