Parking Brake Pedal: Reassembly

INSTALL PARKING BRAKE NO.1 CABLE ASSEMBLY
1. Pass the parking brake No.1 cable assembly through the parking brake pedal and hold the cable with the clip.
  
  Fig 1: Installing Parking Brake No 1 Cable Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pass the parking brake cable through the pedal guide. Temporarily tighten the wire adjusting No.1 nut and lock nut.
  HINT:
  
  Fully tighten the wire adjusting No.1 nut and lock nut when adjusting the parking brake pedal free play.
3. Fully bend the parking brake pedal claw.
INSTALL PARKING BRAKE SWITCH ASSEMBLY
1. Install the parking brake switch assembly with the screw.
  
  Fig 2: Installing Parking Brake Switch Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PARKING PEDAL PAD
1. Engage the claw and install the parking pedal pad on the parking brake pedal.
  
  Fig 3: Installing Parking Pedal Pad
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002