LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake - Hybrid >> Parking Brake Pedal >> Disassembly

Parking Brake Pedal: Disassembly

  1. REMOVE PARKING PEDAL PAD 
    1. Disengage the claw and remove the parking pedal pad from the parking brake pedal.
      Fig 1: Removing Parking Pedal Pad
      G05202972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE PARKING BRAKE SWITCH ASSEMBLY 
    1. Remove the screw and parking brake switch assembly from the parking brake pedal.
      Fig 2: Removing Screw And Parking Brake Switch Assembly From Parking Brake Pedal
      G05202973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE PARKING BRAKE NO.1 CABLE ASSEMBLY 
    1. Pull up the parking brake pedal claw.
    2. Remove the lock nut and wire adjusting No.1 nut of the parking brake No.1 cable assembly from the parking brake pedal.
      Fig 3: Removing Clip And Parking Brake No 1 Cable Assembly From Parking Brake Pedal
      G05202974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the clip and parking brake No.1 cable assembly from the parking brake pedal.
scientia non olet · About LEMON Manuals