LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Hybrid) >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Remove the 2 bolts and the brake pedal stroke sensor assembly.
      Fig 1: Locating Brake Pedal Stroke Sensor Assembly And Bolts
      G05202877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Loosen the stop light switch lock nut and remove the stop light switch assembly from the brake pedal support assembly.
  3. REMOVE BRAKE PEDAL 
    1. Remove the nut, the washer, the bolt and the brake pedal from the brake pedal support assembly.
      Fig 2: Identifying Brake Pedal To Brake Pedal Support Assembly
      G05202878Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE BRAKE PEDAL PAD 
  5. REMOVE STOP LIGHT SWITCH CUSHION 
  6. REMOVE BRAKE PEDAL SHAFT COLLAR 
  7. REMOVE BRAKE PEDAL BUSHING 
    1. Remove the 2 brake pedal bushings from the brake pedal.
  8. REMOVE BRAKE PEDAL SUPPORT 
scientia non olet · About LEMON Manuals