How To Proceed With Troubleshooting

HINT:

• Use this procedure to troubleshoot the power window control system.
• The intelligent tester should be used in steps  3 and  5.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
3. CHECK COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN) 
   1. Use the intelligent tester to confirm normal function of the multiplex communication system.
      1. (ECU unconnected, communication line malfunctioning) Without code outputs, proceed to A.
      2. (ECU unconnected, communication line malfunctioning) With code outputs, proceed to B.

   B: GO TO MULTIPLEX COMMUNICATION SYSTEM  

   A: Go to Next Step 

4. PROBLEM SYMPTOMS TABLE 

   See PROBLEM SYMPTOMS TABLE 

5. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. See TERMINALS OF ECU 
   2. See TERMINALS OF ECU 
6. ADJUST, REPAIR OR REPLACE 
7. RESET POWER WINDOW MOTOR 

   See INITIALIZATION 

   NEXT: END