REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 2 Seat for RH Side): Removal

REMOVE REAR SEAT TRACK BRACKET COVER OUTER
1. Move the rear No.1 seat assembly RH to the rearmost position by operating the rear seat track adjusting handle.
2. Using a screwdriver, disengage the 2 claws.
3. Pull the 2 rear seat track bracket covers toward the rear of the vehicle and remove them.
  
  Fig 1: Identifying Rear Seat Track Bracket Cover Inner Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SEAT TRACK COVER RH
1. Move the rear No.1 seat assembly RH fully forward by operating the rear seat track adjusting handle.
2. Using a molding remover, disengage the 4 claws and remove the rear seat track cover RH.
  
  Fig 2: Identifying Claws Of Rear Seat Track Cover RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SEAT TRACK BRACKET COVER INNER RH
1. Using a molding remover, disengage the 4 claws and remove the rear seat track bracket cover inner RH.
  
  Fig 3: Identifying Claws Of Rear Seat Track Bracket Cover Inner RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SEAT TRACK COVER INNER RH
1. Disengage the 2 claws and clip and remove the rear seat track bracket cover inner RH.
REMOVE REAR NO.1 SEAT ASSEMBLY RH
1. Move the rear No.1 seat assembly RH to the rearmost position by operating the rear seat track adjusting handle.
2. Remove the 2 bolts on the front side.
3. Move the rear No.1 seat assembly RH fully forward by operating the rear seat track adjusting handle.
4. Remove the 3 bolts on the rear side.
5. Move the rear No.1 seat assembly RH to the center position and adjust the seatback to the vertical position.
6. Remove the rear No.1 seat assembly RH.