REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 2 Seat for LH Side): Removal

REMOVE RECLINING HINGE COVER
1. Disengage the 2 clips and remove the reclining hinge cover.
REMOVE REAR SEAT TRACK BRACKET COVER OUTER
1. Move the rear No.1 seat assembly LH to the rearmost position by operating the rear seat track adjusting handle.
  
  Fig 1: Identifying Rear Seat Track Bracket Cover Outer Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, disengage the 2 claws.
  HINT:
  
  Tape the screwdriver tip before use.
3. Pull the 2 rear seat track bracket covers toward the rear of the vehicle and remove them.
REMOVE REAR SEAT TRACK COVER LH
1. Move the rear No.1 seat assembly LH fully forward by operating the rear seat track adjusting handle.
2. Using a molding remover, disengage the 4 clips and remove the rear seat track cover LH.
  
  Fig 2: Identifying Rear Seat Track Cover Clips LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR SEAT TRACK BRACKET COVER INNER LH
1. Using a molding remover, disengage the 4 clips and remove the rear seat track bracket cover inner LH.
Fig 3: Identifying Rear Seat Track Bracket Cover Inner Clips LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SEAT TRACK COVER INNER LH
1. Disengage the 2 claws and clip and remove the seat track cover inner LH.
REMOVE REAR NO.1 SEAT ASSEMBLY LH
1. Move the rear No.1 seat assembly LH to the rearmost position by operating the rear seat track adjusting handle.
2. Remove the 2 bolts on the front side.
3. Move the rear No.1 seat assembly LH fully forward by operating the rear seat track adjusting handle.
4. Remove the 3 bolts on the rear side.
5. Move the rear No.1 seat assembly LH to the center position and adjust the seatback to the vertical position.
6. Remove the rear No.1 seat assembly LH.