Fuel Lid Opener Motor Assembly: Inspection

INSPECT FUEL LID MOTOR ASSEMBLY

Apply battery voltage to the lock control and check the motor operates in the open direction.

Fig 1: Identifying Fuel Lid Opener Motor Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard

MEASUREMENT CONDITION REFERENCE

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1	Motor operates and shaft moves in open direction

If the result is not as specified, replace the fuel lid opener motor assembly.

Check the shaft stroke.
Standard: 10.3 mm (0.406 in.) or more

If the result is not as specified, replace the fuel lid opener motor assembly.