LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Hybrid) >> Back Door Support >> Disposal

Back Door Support: Disposal

  1. DISPOSE OF BACK DOOR SUPPORT 
    1. Horizontally fix the stay on a vise, with the piston rod pulled out.
    2. Wearing safety glasses, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.
      NOTE: Although the gas inside the stay is colorless, odorless and harmless, there is a possibility that metal debris from could scatter. Therefore, cover it with clothes or something similar.
      Fig 1: Identifying Back Door Support Dimension
      G05244239Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals