Tire And Wheel System: Inspection

INSPECT TIRE

Check the tires for wear and proper inflation pressure.

Cold tire inflation pressure

COLD TIRE INFLATION PRESSURE

Tire size	Front kPa (kgf/cm² , psi)	Rear kPa (kgf/cm² , psi)
225/65R17 101S	220 (2.2, 32)	220 (2.2, 32)

Using a dial indicator, check the tire runout (vertical and horizontal).
Tire runout: 1.4 mm (0.055 in.) or less

ROTATE TIRES
1. See the illustration for where to rotate each tire.
  
  Fig 1: Rotating Tires
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT WHEEL BALANCE
1. Check and adjust the off-the-car balance.
2. If necessary, check and adjust the on-the-car balance.
  Imbalance after adjustment: 8.0 g (0.018 lb) or less
  
  Fig 2: Identifying Wheel Balance Machine
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT BEARING LOOSENESS (See ON-VEHICLE INSPECTION )
INSPECT AXLE HUB RUNOUT (See REMOVAL )