Front Seatback Heater: Inspection
- INSPECT FRONT SEATBACK HEATER LH
- Apply battery voltage and check the seatback heater.
OK
MEASUREMENT CONDITION AND SPECIFIED CONDITION CHARTMeasurement Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Seatback heater become warm If the result is not as specified, replace the front seatback cover.
NOTE: Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.
- Apply battery voltage and check the seatback heater.
- INSPECT FRONT SEATBACK HEATER RH
- Apply battery voltage and check the seatback heater.
OK
MEASUREMENT CONDITION AND SPECIFIED CONDITION CHARTMeasurement Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Seatback heater become warm If the result is not as specified, replace the front seatback cover.
NOTE: Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.
- Apply battery voltage and check the seatback heater.