LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat (Hybrid) >> Front Seat Frame With Adjuster >> Inspection

Front Seat Frame With Adjuster: Inspection

  1. INSPECT FRONT SEAT ADJUSTER SUB-ASSEMBLY LH 
    1. Check operation of the seat frame (slide motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
        Fig 1: Identifying Front Seat Adjuster Sub-Assembly LH Connector Terminals
        G05244133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        MEASUREMENT CONDITION AND OPERATIONAL DIRECTION CHART

        Measurement Condition Operational Direction
        Battery positive (+) → 1
        Battery negative (-) → 2        		 Forward
        Battery positive (+) → 2
        Battery negative (-) → 1        		 Backward

        If the result is not as specified, replace the seat frame with adjuster.

    2. Check operation of the seat frame (front vertical motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.
        Fig 2: Identifying Front Seat Adjuster Sub-Assembly LH Connector Terminals
        G05244133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        MEASUREMENT CONDITION AND OPERATIONAL DIRECTION CHART

        Measurement Condition Operational Direction
        Battery positive (+) → 1
        Battery negative (-) → 2        		 Upward
        Battery positive (+) → 2
        Battery negative (-) → 1        		 Downward

        If the result is not as specified, replace the seat frame with adjuster.

    3. Check operation of the seat frame (lifter motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.
        Fig 3: Identifying Front Seat Adjuster Sub-Assembly LH Connector Terminals
        G05244133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        MEASUREMENT CONDITION AND OPERATIONAL DIRECTION CHART

        Measurement Condition Operational Direction
        Battery positive (+) → 2
        Battery negative (-) → 1        		 Upward
        Battery positive (+) → 1
        Battery negative (-) → 2        		 Downward

        If the result is not as specified, replace the seat frame with adjuster.

    4. Check operation of the seat frame (reclining motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
        Fig 4: Identifying Front Seat Adjuster Sub-Assembly LH Connector Terminals
        G05244133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        MEASUREMENT CONDITION AND OPERATIONAL DIRECTION CHART

        Measurement Condition Operational Direction
        Battery positive (+) → 2
        Battery negative (-) → 1        		 Forward
        Battery positive (+) → 1
        Battery negative (-) → 2        		 Backward

        If the result is not as specified, replace the seat frame with adjuster.

  2. INSPECT FRONT SEAT ADJUSTER SUB-ASSEMBLY RH 
    1. Check operation of the seat frame (slide motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
        Fig 5: Identifying Front Seat Adjuster Sub-Assembly LH Connector Terminals
        G05244133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        MEASUREMENT CONDITION AND OPERATIONAL DIRECTION CHART

        Measurement Condition Operational Direction
        Battery positive (+) → 2
        Battery negative (-) → 1        		 Forward
        Battery positive (+) → 1
        Battery negative (-) → 2        		 Backward

        If the result is not as specified, replace the seat frame with adjuster.

    2. Check operation of the seat frame (reclining motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
        Fig 6: Identifying Front Seat Adjuster Sub-Assembly LH Connector Terminals
        G05244133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        MEASUREMENT CONDITION AND OPERATIONAL DIRECTION CHART

        Measurement Condition Operational Direction
        Battery positive (+) → 2
        Battery negative (-) → 1        		 Forward
        Battery positive (+) → 1
        Battery negative (-) → 2        		 Backward

        If the result is not as specified, replace the seat frame with adjuster.

scientia non olet · About LEMON Manuals