Outer Mirror Switch: Inspection
- INSPECT OUTER MIRROR SWITCH
- Remove the outer mirror switch.
- Measure the resistance of according to the value(s) in the table below when switch is operated.
Standard resistance:
Select "L" on the left/right adjustment switch
SELECT "L" ON THE LEFT/RIGHT ADJUSTMENT SWITCHTester Connection Switch Position Specified Condition 4 - 8 UP Below 1 Ω 6 - 7 4 - 7 DOWN 6 - 8 5 - 8 LEFT 6 - 7 5 - 7 RIGHT 6 - 8 Select "R" on the left/right adjustment switch
SELECT "R" ON THE LEFT/RIGHT ADJUSTMENT SWITCHTester Connection Switch Position Specified Condition 3 - 8 UP Below 1 Ω 6 - 7 3 - 7 DOWN 6 - 8 2 - 8 LEFT 6 - 7 2 - 7 RIGHT 6 - 8