LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Hybrid) >> Rear Combination Light Assembly >> Reassembly

Rear Combination Light Assembly: Reassembly

  1. INSTALL BACK UP LIGHT SOCKET 
    1. Install the back up light socket to the back up light bulb.
  2. INSTALL BACK UP LIGHT BULB 
    1. Install the back up light bulb and the back up light socket to the rear combination light lens and body as a unit.
  3. INSTALL REAR TURN SIGNAL LIGHT SOCKET 
    1. Install the rear turn signal light socket to the rear turn signal light bulb.
  4. INSTALL REAR TURN SIGNAL LIGHT BULB 
    1. Install the rear turn signal light bulb and the rear turn signal light socket to the rear combination light lens and body as a unit.
  5. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY 
    1. Install the rear combination light socket and wire sub-assembly to the rear combination light bulb.
  6. INSTALL REAR COMBINATION LIGHT BULB 
    1. Install the rear combination light bulb and the rear combination light socket and wire sub-assembly to the rear combination light lens and body as a unit.
    2. Engage the clamp.
scientia non olet · About LEMON Manuals