LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Hybrid) >> High Mounted Stop Light Assembly >> Reassembly

High Mounted Stop Light Assembly: Reassembly

  1. INSTALL HIGH MOUNTED STOP LIGHT GASKET 
    1. Clean the installation surface of the high mounted stop light assembly with white gasoline.
    2. Install the new high mounted stop light gasket.
  2. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY 
    1. Install the high mounted stop light assembly with the 2 screws and the 4 claws.
      2. Fig 1: Identifying High Mounted Stop Light Assembly With Screws
      G05204316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL HIGH MOUNTED STOP LIGHT SOCKET AND WIRE 
    1. Install the high mounted stop light socket and wire to the high mounted stop light bulb.
  4. INSTALL HIGH MOUNTED STOP LIGHT BULB 
    1. Install the high mounted stop light bulb and the high mounted stop light socket and wire to the high mounted stop light lens as a unit.
    2. Connect the connector.
  5. INSTALL BACK WINDOW PANEL TRIM UPPER 
scientia non olet · About LEMON Manuals