Rear Bumper: Reassembly

INSTALL REAR BUMPER SIDE RETAINER LH
1. Temporarily install the rear bumper side retainer LH with the claws.
2. Install the rear bumper side retainer LH with the 3 screws.
  Torque: 3.0 N*m (31 kgf*cm, 27 In.*lbf)
  
  Fig 1: Identifying Rear Bumper Side Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER SIDE RETAINER RH
INSTALL REAR BUMPER REINFORCEMENT NO.1
1. Install the rear bumper reinforcement No.1 with the 6 bolts.
  Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
  
  Fig 2: Installing Rear Bumper Reinforcement No. 1 Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER BAR RH
INSTALL REAR BUMPER BAR LH
INSTALL REAR BUMPER BAR
INSTALL REAR BUMPER ENERGY ABSORBER
INSTALL BUMPER MOULDING SET BOLT NO.1