Rear Bumper: Disassembly

REMOVE BUMPER MOULDING SET BOLT NO.1
1. Remove the 4 bumper moulding set bolts No.1.
  
  Fig 1: Removing Bumper Moulding Set Bolts No.1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR BUMPER ENERGY ABSORBER
1. Remove the rear bumper energy absorber
  
  Fig 2: Removing Rear Bumper Energy Absorber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR BUMPER BAR
1. Remove the rear bumper bar.
  
  Fig 3: Removing Rear Bumper Bar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR BUMPER BAR LH
1. Remove the rear bumper bar LH.
  
  Fig 4: Removing Rear Bumper Bar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR BUMPER BAR RH
REMOVE REAR BUMPER REINFORCEMENT NO.1
1. Remove the 6 nuts and rear bumper reinforcement No.1.
  
  Fig 5: Removing Rear Bumper Reinforcement No. 1 Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR BUMPER SIDE RETAINER LH
1. Remove the 3 screws.
2. Disconnect the 4 claws and remove the rear bumper side retainer LH.
  
  Fig 6: Identifying Rear Bumper Side Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR BUMPER SIDE RETAINER RH