LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior (Hybrid) >> Front Bumper >> Reassembly

Front Bumper: Reassembly

  1. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)  (See INSTALLATION )
  2. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light) 
  3. INSTALL FOG LIGHT PROTECTOR LH (w/ Fog Light) 
  4. INSTALL FOG LIGHT PROTECTOR RH (w/ Fog Light) 
  5. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light) 
  6. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light) 
  7. INSTALL FRONT BUMPER COVER LOWER 
  8. INSTALL FRONT BUMPER HOLE COVER LH 
  9. INSTALL FRONT BUMPER HOLE COVER 
  10. INSTALL FRONT BUMPER BAR GARNISH NO.2 
  11. INSTALL FRONT BUMPER BAR GARNISH NO.1 
  12. INSTALL RADIATOR GRILLE LOWER 
  13. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET 
  14. INSTALL FRONT BUMPER STAY CENTER 
  15. INSTALL FRONT BUMPER REINFORCEMENT 
    1. Install the front bumper reinforcement with the 6 bolts.

      Torque: 77 N*m (785 kgf*cm, 57 ft.*lbf) 

      Fig 1: Installing Front Bumper Reinforcement Bolts
      G05205541Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL FRONT BUMPER ENERGY ABSORBER 
scientia non olet · About LEMON Manuals