LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter (Hybrid) >> Engine Oil Pressure Switch >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Ground the terminal of the wire harness side, then measure the resistance.

      Standard Resistance: 

      Engine idling: Below 1 Ω 

      Engine stopped: 10 kΩ or higher 

      HINT:

      If the value is not as specified, replace the engine oil pressure switch.