LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter (Hybrid) >> Combination Meter >> Installation

Combination Meter: Installation

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connectors.
    2. Install the combination meter assembly with the 3 screws.
      Fig 1: Identifying Combination Meter Assembly
      G05243353Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH 
    1. Engage the claw.
    2. Install the instrument cluster finish panel garnish with the 4 screws.
      Fig 2: Identifying Instrument Cluster Finish Panel Garnish
      G05243352Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. Engage the 5 clips and install the instrument cluster finish panel assembly.
      Fig 3: Identifying Instrument Cluster Finish Panel Assembly
      G05243351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER 
    1. Connect the connectors.
    2. Engage the 5 clips and install the instrument panel finish panel lower.
      Fig 4: Identifying Clips
      G05243350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION (+).
scientia non olet · About LEMON Manuals