LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Communication (Hybrid) >> Multiplex Communication System >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the intelligent tester to the DLC3.
      Fig 1: Connecting Cable Of Intelligent Tester To DLC3
      G05205755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the ignition switch on.
    3. Read DTCs on the tester screen.

      HINT:

      Refer to the intelligent tester operators manual for further details.

  2. CLEAR DTC 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the ignition switch on.
    3. Clear the DTCs by following the prompts on the tester screen.

      HINT:

      Refer to the intelligent tester operators manual for further details.

scientia non olet · About LEMON Manuals