LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla LE, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering >> Vane Pump >> Removal

Vane Pump: Removal

  1. REMOVE FRONT WHEEL RH 
  2. DRAIN POWER STEERING FLUID 
  3. REMOVE ENGINE UNDER COVER RH 
  4. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO. 1 
    1. Remove the clip and disconnect the oil reservoir to pump hose No. 1.
    Fig 1: Identifying Pump Hose No. 1
    G05195195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY 
    1. Using SST, disconnect the pressure feed tube assembly.

      SST 09023-12901 

    2. Remove the bolt and disconnect the pressure feed tube clamp.
    Fig 2: Disconnecting Pressure Feed Tube Assembly
    G05195196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE VANE PUMP BRACKET REAR 
    1. Remove the bolt and vane pump bracket rear.
  8. REMOVE VANE PUMP ASSEMBLY 
    1. Disconnect the oil pressure switch connector.
    2. Remove the 2 bolts, 2 nuts and vane pump assembly.
    Fig 3: Locating Vane Pump Assembly Bolts And Nuts
    G05195197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals