Circuit Description
WARNING: This page is about a different car, the 2006 Toyota Corolla and 2005 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
If any of the following is detected, the ABS warning light remains on:
- The skid control ECU connectors are disconnected from the skid control ECU.
- There is a malfunction in the skid control ECU internal circuit.
- There is an open in the wire harness between the combination meter and skid control ECU.
HINT: The hand-held tester may not usable use when there is a malfunction in the skid control ECU.